PRODUCT OVERVIEW: The SLEM is the a highly energy efficient and long lasting outdoor bollard. Perfect for walkways, decks, sidewalks and landscape areas, the SLEM uses a maximum of only 10 watts electricity, making the SLEM more efficient and cost effective than both incandescent and compact fluorescent illuminated bollards. With its high-end architectural appeal and weatherproof die-cast aluminum housing, the SLEM is perfect for both new construction and retrofit installations. The aluminum housing is available in black and bronze finishes with custom colors available upon request for an additional charge. The SLEM is capable of both normally on and emergency power operation modes. Illumination is provided by cool white LEDs with a 3500-Kelvin color temperature. The SLEM can be outfitted with a maximum of 4 LED lights, one on side, allowing for directional light control. ETL Listed to UL standards.

CONSTRUCTION: The SLEM Composite LED Bollard is fabricated in a heat formed pulltruding process that utilizes fiberglass reinforced polymers as the base process material. The anchor base model is 36" Hx 5" W x 5" D and includes a specially designed heavy gauge galvanized base collar with provisions for a 4 bolt anchoring system. All exposed hardware is stainless steel, with the LED light engines embedded and sealed within the composite structure. The LED light engines are constructed of die cast aluminum with all diffusers fabricated from injection molded, UV stabilized, polycarbonate material. The Composite Bollard shaft is painted via an automated paint system, with LED light engines finished in a durable power coat paint process.

ILLUMINATION: The SLEM Composite LED Bollard can be specified to utilize from 1 to 4 White LED light engines. Each LED light engine is manufactured using three 3500 kelvin White LED devices supported by a LED driver circuit designed specifically to support this LED light engine. Power consumption per LED light engine is 10 watts, and supports a continuous duty service life of 10 years or 40,000 hours to 75% illumination levels.

BATTERY TECHNOLOGY: The SLEM does not use batteries but includes a convenient wiring harness that is suitable for hardwiring to the utility input.

INSTALLATION: The SLEM LED Bollard (anchor base models) shall include a 4.26” x 4.26” galvanized steel mounting base integral to the composite bollard housing, and secured to the foundation via (4) 1/4"-20” x 8” x 2” stainless steel anchor bolts set in concrete. Lag Bolt anchored models shall include the same mounting base described above, however will utilize special galvanized expanding lag bolts suitable for use in concrete, masonry, or wood foundations. Embedded base models shall have provisions for below ground conduit entry, and must be buried to comply with standards as required in the National Electrical Code (NEC). All supply wiring shall be 18 AWG minimum and comply with the NEC and local electrical codes.

CODE COMPLIANCE: ETL listed to UL standards 1598 and 1838.