PRODUCT OVERVIEW: The HZFPEL is a hazardous location emergency light that comes in 6 and 12 volt versions constructed from rugged fiberglass and polyester. These emergency lights are sealed and gasketed and suitable for use in NEMA 3, 4X and 12 areas.

CONSTRUCTION: Impact resistant, industrial gray fiberglass reinforced polyester enclosure with stainless steel hardware is completely sealed and gasketed. The enclosure includes a built in window in the front cover for viewing the AC indicator light and any optional metering devices. Impact resistant, UV stable, flame rated thermoplastic are used for lamp housing and are matched with swivel assemblies in gray finish to match unit housing. Heads and swivels are sealed and gasketed. Lighting heads are fully adjustable and feature lockable swivels.

ILLUMINATION: High output sealed beam lamps provide glare-free light distribution. Lamp Type: Par 36 sealed beam type 6 Volt Lamp Ratings: 8 to 30 watt tungsten, 8 or 12 watt halogen 12 Volt Lamp Ratings: 12 to 30 watt tungsten, 8 or 12 watt halogen Lamp Life: 100 hours (expected average)

BATTERY TECHNOLOGY: Sealed lead calcium or longest life sealed nickel cadmium maintenance free battery (depending on model) designed to provide many years of dependable service.

INSTALLATION: Units are designed for installation to wall surfaces by means of internal knockouts or four external mounting feet provided with the enclosure. A wiring hub is provided on the right hand side of the enclosure for attachment of surface wiring conduit.

ELECTRICAL SPECIFICATIONS: Charger Type: Fully automatic and temperature compensating Nickel Cadmium Models: Constant Current Type Lead Calcium Models: Variable Rate Float Type
Utility Input: 120/277VAC, 60 Hz. Power Consumption: 68 watts (maximum) Temperature Range (Lead Calcium Models): 68ºF to 86ºF (20ºC to 30ºC) Temperature Range (Nickel Cadmium Models): 20ºF to 95ºF (-7ºC to 35ºC)
Recharge Duty Cycle: 24 hours
Load Transfer: All models utilize a solid state transfer circuit for load connection.
Controls: Momentary test switch and LED AC-On indicator
Safety Circuitry: AC Lockout: Prevents battery discharge prior to initial unit power-up saving installation time.
Low Voltage Battery Disconnect: Protects the battery from being severely damaged by deep discharge during prolonged power failures. Short Circuit Protection: On units with solid state transfer, output protection is provided by a disconnect circuit that automatically resets itself when the fault condition is corrected. Brownout Protection: Automatically switches the unit to emergency mode when AC sags below 80% of nominal.

CODE COMPLIANCE: All models are UL924 Listed and meet NFPA 101 Life Safety Code, NEC, OSHA, BOCA, NSF Standard 2 “Splash Zone,” state and local codes.