PRODUCT OVERVIEW: The Iron Cross Emergency Lighting system is available in 6 or 12 volt emergency lighting and is designed to be installed in accordance with Article 501 of the National Electrical Code and is UL Listed. The transformer is 120/277 volt. Units are furnished with sealed 6 or 12 volt battery. The unit charger utilizes a micro - controller circuit which samples the battery in relation to its temperature, state of charge and input voltage fluctuations. The charger is current limited, temperature compensated, short - circuit proof and reverse polarity protected. The unit is furnished with an electronic lockout circuit which will connect the battery when the AC circuit is activated, and an electronic brownout circuit which will activate the unit when utility power dips below 80 - 85% of nominal voltage. A low voltage battery protection circuit is provided and will disconnect the load and circuitry from the output circuit when battery r es 87 - 1/2% discharge. The unit is furnished with one or two protected charger output circuits and a solid state switch. The unit is capable of full recharge in compliance with Underwriters Laboratories specifications. The unit is furnished complete with a test switch and AC pilot light UL Listed for Class I Division 2 requirements. Cabinet is constructed of Injected molded structural foam, glass reinforced. The unit has a fully gasketed cover. The battery compartment is provided with a breather vent designed for Class I Division 2 operation. The unit is furnished with two EF 11 weather resistant lighting heads. Heads are constructed of impact resistant, flame retardant thermoplastic complete with 12 watt sealed beam high intensity lamps. Stahlin Vapor Capsules contain a unique vapor phase inhibitor designed to protect metallic surfaces within an enclosure against airborne corrosion. By simply placing these self - contained capsules inside an enclosure the vapors readily permeate every point, passivating all metallic surfaces. When the capsule is removed from its sealed package, it begins to emit an invisible, non - toxic vapor which is diffused throughout the surrounding atmosphere until the air is saturated. The vapor then passivates the metal surfaces against atmospheric corrosion by reducing the electro - chemical activity of the metal surfaces. Radius of Protection is 2 ft with a normal life span of 1 year.

CONSTRUCTION: The gray Enclosure is made of Structural foam, glass reinforced construction. The Fully gasketed front provides access to battery and charger. The unit as standard, is furnished with two, EF11 weather resistant thermoplastic heads utilizing 12 watt sealed beam lamps.

ILLUMINATION: two (2) weather - resistant, impact - resistant, flame - retardant thermoplastic EF - 11 lamp heads with 12 watt high intensity sealed beam tungsten lamps (standard).

BATTERY TECHNOLOGY: Sealed Lead Calcium battery with Low voltage battery disconnect circuit automatically shuts down lamp load and circuitry when battery r es 87 - 1/2% discharge, preventing deep discharge and permanent damage to the battery. Brownout

INSTALLATION: Unit is designed to be back mounted to wall surface via 4 fasteners.

ELECTRICAL SPECIFICATIONS: 120/277 Vac, 60 Hz., 0.43/0.2 Amp. 6 or 12 volt protected output circuit. 24 watts or 56 watt Transfer which Automatically and instantly energizes lamp load upon failure of AC supply.

CODE COMPLIANCE: UL Listed - Class I Div 2 Groups A,B,C,D and Class II Div 2 F and G