PRODUCT OVERVIEW: The CSEL Series Commercial Steel Emergency Light features rugged heavy duty steel construction and powerful PAR style incandescent lamps. The CSEL is approved for use in New York City and is available in 6, 12, or 24 volt models. The capacity of the CSEL ranges from 15-200 watts. The CSEL mounts to the wall by means of keyhole slots and is available in white or black. The CSEL utilizes a maintenance-free, Lead Calcium Battery. Pure Lead and Nickel Cadmium batteries are also available. The CSEL features a LED status indicator and push-to-test button standard. Illumination is provided by PAR 36 style incandescent lamps enclosed in a thermoplastic housing. UL 924 Listed.

CONSTRUCTION: Heavy duty steel cabinet is finished in neutral cream baked-on powder paint providing scratch and corrosion resistance. Optional black and special color paint finishes available. Lighting heads are impact resistant, UV stable, flame rated thermoplastic lamp housing and swivel assemblies in neutral cream color to match unit housing. Lighting heads are fully adjustable and feature lockable swivels.

ILLUMINATION: High output incandescent lamps maximize illumination characteristics through a specially designed reflector and glass lens assembly that provides glare-free trapezoidal light distribution. Lamp Type 6 and 12V models: Incandescent - wedge base Lamp Type 24V models: Incandescent - bayonet base 6 Volt Lamp Rating: 6 volt, 7.2 watt 12 Volt Lamp Rating: 12 volt, 9 watt 24 Volt Lamp Rating: 24 volt, 9 watt Lamp Life: 100 hours (expected average)

BATTERY TECHNOLOGY: 6V, 4 amp-hour lead calcium battery works during power failures. Easily replaceable and requires no maintenance. When completely charged, supplies emergency power for 90 minutes. Indicator light shows high charge and readiness for operation.

INSTALLATION: Mounting: Units are designed for mounting to walls by means of keyhole slots provided in the back of the unit housing. Units may also be mounted by means of accessory wall bracket or mounting shelf. Wiring: Knockouts are provided in the back of the housing for rear wiring from standard electrical boxes. Surface wiring is also provided for by conduit knockouts in the top and left hand side of the unit housing.

ELECTRICAL SPECIFICATIONS: Charger Type: Fully automatic, temperature compensating, variable rate float charger
Utility Input: 120/277VAC, 60 Hz. Power Consumption: 15 watts (maximum)
Temperature Range: 68ºF to 86ºF (20ºC to 30ºC)
Recharge Duty Cycle: 24 hours
Load Transfer: 6 volt models rated 25 watts or less and 12 volt models rated 50 watts or less utilize a solid state transfer circuit for load connection. All other models utilize mechanical relays for load transfer and provide fused DC load connections.
Controls: Momentary test switch and LED AC-On indicator light
Safety Circuitry: AC Lockout: Prevents battery discharge prior to initial unit power-up saving installation time.
Low Voltage Battery Disconnect: Protects the battery from being severely damaged by deep discharge during prolonged power failures. DC Overload and Short Circuit Protection: On units with solid state transfer, output protection is provided by a disconnect circuit that automatically resets itself when the fault condition is corrected. On units with mechanical relay transfer, output protection is provided by fused load connections. Brownout Protection: Automatically switches the unit to emergency mode when utility voltage is reduced to the point at which most fluorescent light fixtures would extinguish.

CODE COMPLIANCE: All models are UL924 Listed and meet NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.