PRODUCT OVERVIEW: The Peregrine architectural emergency light offers a sleek, streamlined design. Xenon lamps offer superior efficacy which allows the unit to be mounted up to 34' on center. Optional Dual-mode feature allows the unit to provide 5w LED illumination during normal operation. The unit is fully gasketed for outdoor and wet locations.

CONSTRUCTION: Cast aluminum housing is powdercoated. Fully gasketed UV stabilized lens suitable for indoor and outdoor cold and wet locations.

ILLUMINATION: Two Hi-Output Xenxon wedge base T3-1/4 in 6w or 10w. Optional 5w LED illumination available for normal operation.

BATTERY TECHNOLOGY: Unit is available with sealed lead calcium or nickel metal hydride. Battery has 3-year Full, plus 3-year pro-rata warranty.

INSTALLATION: Indoor Standard, Indoor Hi-Output, Exterior Wet & Cold Location. Unit is back/surface mounted with electrical input from junction box or top conduit entry.

ELECTRICAL SPECIFICATIONS:

• Charger Type: Solid state charging circuitry.
• 
  Utility Input: 120/277VAC, 60 Hz
• 
  Recharge Duty Cycle: 24 hours


• Temperature Rating: +68°F to +86°F (+20°C to +30°C);(Cold Option -4F to +104F (-20C to +40C))
• 
  Load Transfer: All models utilize a solid state transfer circuit for load connection.
• 
  Controls: Momentary test switch and LED AC-On indicator light

• AC Lockout: Prevents battery discharge prior to initial unit power-up saving installation time.



• 
  Low Voltage Battery Disconnect: Protects the battery from being severely damaged by deep discharge during prolonged power failures.


• Short Circuit Protection: On units with solid state transfer, output protection is provided by a disconnect circuit that automatically resets itself when the fault condition is corrected.


• Brownout Protection: Automatically switches the unit to emergency mode when AC voltage falls below 80% of nominal.


• Lead-Calcium models: are equipped with PulsePlus circuitry for long battery life and excellent performance. This current-limiting charger will minimize energy consumption. A red LED indicates that AC power is on.


• Nickel Metal Hydride Models: are equipped with self diagnostics. This charger is a self-test and self-diagnostic charger. It will monitor and indicate any of the following failures: battery disconnect, battery, charger and lamp failures. The unit will perform a periodical self-test, of minimum 30 seconds every 30 days, 30 minutes every six months and 90 minutes annually. Discharge test can also be initiated manually. A bi-color LED indicates battery state of charge, test activation and four-state diagnostic status.

CODE COMPLIANCE: UL Listed, ADA Compliant, Exterior Package Models are UL Listed for cold outdoor/wet locations (-4F to +104F)