PRODUCT OVERVIEW: The RH Series is ideal for use in hazardous locations where explosive materials may be present. Constructed from impact resistant, fiberglass reinforced polyester and approved for NEMA 4, 4x, 12 and 13 areas, and in class I, Division 2, Groups A, B, C & D, Zone 2, Groups IIA, IIB, H & IIC areas.

CONSTRUCTION: Constructed of impact resistant, fiberglass reinforced polyester. Housing color is gray and includes stainless steel hardware. Housing is approved for NEMA 4, 4x, 12 and 13 areas, and in class I, Division 2, Groups A, B, C & D, Zone 2, Groups IIA, IIB, H & IIC areas. Viewthrough window allows easy monitoring of AC indicator and optional voltmeter and ammeter. Available with Class II, Division 2 rated polycarbonate sealed beam Par 36 tungsten or halogen lamp heads. Optional shatter-resistant shield for lamp heads is designed for use in food service areas.

ILLUMINATION: Illumination is accomplished with lamp heads mounted on the top of the unit. The Class 1, Div 2 rated lamp head is available in a variety of wattages and is constructed of gray polycarbonate to match the RH Series housing.

BATTERY TECHNOLOGY: Maintenance-free, sealed nickel cadmium battery has an estimated service life of 12 years, and an operating temperature range of 20°F (-7°C) to 95°F (35°C). Maintenance-free, sealed lead calcium battery has an estimated service life of 10 years, and an operating temperature range of 65°F (19°C) to 85°F (30°C). Batteries supply 90 minutes of emergency power.

INSTALLATION: Standard internal mounting or external mounting feet for installation flexibility. The RH series mounts flush against walls.

ELECTRICAL SPECIFICATIONS: Charger Type: Fully automatic, temperature compensating, variable rate float charger
Utility Input: 120/277VAC, 60 Hz. Power Consumption: 15 watts (maximum)
Temperature Range: 20°F (-7°C) to 95°F (35°C) with the sealed nickel cadmium battery, and 65°F (19°C) to 85°F (30°C) with the sealed lead calcium battery.
Recharge Duty Cycle: 24 hours
Load Transfer: A solid state transfer circuit provides load connection.
Controls: Momentary test switch and LED AC-On indicator light
Safety Circuitry: AC Lockout: Prevents battery discharge prior to initial unit power-up saving installation time.
Low Voltage Battery Disconnect: Protects the battery from being severely damaged by deep discharge during prolonged power failures. Brownout Protection: Automatically switches the unit to emergency mode when utility voltage is reduced to the point at which most fluorescent light fixtures would extinguish.

CODE COMPLIANCE: UL 924 listed, NFPA 7O, NFPA 101, NEC and OSHA. Nickel cadmium units additionally UL listed for Class 11, Division 2, Groups F & G applications.