PRODUCT OVERVIEW: The EMS series of emergency lighting units offer dependable illumination in a compact and affordable package. The EMS series housing is constructed from durable 20 gauge steel and finished in a white powder coat. Top mounted PAR36 heads are standard. Universal mounting pattern and conduit knock-outs allow for easy field installation.

CONSTRUCTION: The EMS is constructed from a solid and durable 20 gauge steel housing. Emergency lighting heads are molded from high impact thermoplastic in a matching color; Par36 style heads are standard, Par18 style heads are optional. The universal mounting pattern stamped into the back of the unit allows for direct mounting to various conduit boxes. Key hole slots are also provided for additional mounting possibilities. Stamped conduit knockouts are supplied standard on all EMS units, providing the widest range of options for AC power source connection. Remote lamp loads are connected to the emergency power supply with sturdy magnum terminal connectors. These connectors allow for a large gauge of wire to be used increasing the flexibility of installation. The EMS is supplied standard in a durable white powder coat, baked finish. Other colors are available, including custom color matching, please specify.

ILLUMINATION: The EMS series is normally supplied with two top mounted Par36 style heads. Smaller Par18 style heads are optional. Both lamp head styles are constructed of high impact thermoplastic in a color matching the finish of the cabinet (white is standard). Both head types feature a unique locking twist collar that securely holds the lens and facilitates quick and easy re-lamping. 6V TUNGSTEN: standard: 7.2w, 9w halogen: 8w, 10w, 12w 6V SEALED BEAM: standard: 9w, 12w halogen: 12w

BATTERY TECHNOLOGY: The EMS series is designed with maintenance free, sealed valve regulated lead acid battery that provides a minimum emergency duration of 90 minutes (for the listed rating). Recharge time of the battery is twenty-four hours. The maximum working temperature is 50 C.

INSTALLATION: The EMS is suitable for surface, wall, ceiling and pendant mounting. Also suitable for indoor installation on normally inflammable surfaces.

ELECTRICAL SPECIFICATIONS: Charger Type: fully automatic current limited charger with solid state line-latched low voltage disconnect protection
Utility Input: 120/277VAC, 60 Hz.
Temperature Range: Maximum working temperature 50 C
Recharge Duty Cycle: 24 hours
Load Transfer: All models utilize a solid state transfer circuit for load connection.
Controls: Test switch and LED AC-On indicator light
Safety Circuitry: AC Lockout: Prevents battery discharge prior to initial unit power-up saving installation time.
Low Voltage Battery Disconnect: Protects the battery from being severely damaged by deep discharge during prolonged power failures. DC Overload and Short Circuit Protection: Provided by a disconnect circuit that automatically resets itself when the fault condition is corrected. Brownout Protection: Automatically switches the unit to emergency mode when utility voltage is reduced to the point at which most fluorescent light fixtures would extinguish.

CODE COMPLIANCE: Certified by ETL or CSA to UL924 Standards, complies with state and local codes.