PRODUCT OVERVIEW: The LTI series of industrial emergency lighting units are designed for durability and dependability. The NEMA 12 gasketed steel housing can be used in areas that generate dust, lint, fibers, dripping water and condensation. The LTI is designed with a pulse switching charger. This charger offers superior performance and energy efficiency versus conventional constant voltage chargers. Traditional top mounted Par36 style heads are standard, Par18 style heads are optional.

CONSTRUCTION: The LTI series is constructed with a 16 gauge steel cabinet. Magnum terminal connectors allow for larger gauge wires to be connected for remote loads. Industrial gray powder coat finish is standard. Emergency lighting heads are molded from high impact thermoplastic, Par36 style are standard, Par18 style are optional. Both lamp head styles are constructed of high impact thermoplastic. Both head types feature a unique twist locking collar that securely holds the lens and facilitates quick and easy re-lamping. The Par36 style metal heads and food-prep approved lenses are also available when ordering. The LTI features integrated mounting feet that ensure positive and secure installations. External test switch & monitor LED are standard.

ILLUMINATION: The LTI series is normally supplied with two top mounted Par36 style 9w heads. Optional Par18 style heads are available. 6V TUNGSTEN: standard: 9w, (H) halogen: 8w, 10w, 12w, 20w 6V SEALED BEAM: (SB) standard: 9w, 12w, 18w (SBH) halogen: 12w, 20w 12V TUNGSTEN: standard: 9w, 18w (H) halogen: 8w, 12w, 20w, *35w, (*LR only) 12V SEALED BEAM: (SB) standard: 12w, 18w (H) halogen: 8w

BATTERY TECHNOLOGY: The LTI series is designed with maintenance free, sealed valve regulated lead acid battery that provides a minimum emergency duration of 90 minutes (for the listed rating). Recharge time of the battery is twenty-four hours. The maximum working temperature is 50 C.

INSTALLATION: The LTI is suitable for surface wall mounting. Suitable for NEMA 12 required installations. The integrated mounting feet allow for direct and secure mounting to most surfaces.

ELECTRICAL SPECIFICATIONS: Charger Type: solid state charging circuitry
Utility Input: 120/277VAC, 60 Hz.
Recharge Duty Cycle: 24 hours
Temperature Range: Max temp 122 F or 50 C
Load Transfer: solid state transfer circuit for load connection
Controls: Momentary test switch and LED AC-On indicator light
Safety Circuitry: AC Lockout: Prevents battery discharge prior to initial unit power-up saving installation time.
Low Voltage Battery Disconnect: Protects the battery from being severely damaged by deep discharge during prolonged power failures. DC Overload and Short Circuit Protection: Provided by a disconnect circuit that automatically resets itself when the fault condition is corrected. Brownout Protection: Automatically switches the unit to emergency mode when utility voltage is reduced to the point at which most fluorescent light fixtures would extinguish.

CODE COMPLIANCE: All models are ETL listed to UL924 standards.