PRODUCT OVERVIEW: The WLEL is offered in 6 and 12 volt versions and designed for use in wet or dirty areas. Units feature corrosion-resistant enclosures, gasketed construction and sealed lighting heads.

CONSTRUCTION: Corrosion resistant NEMA 4X type sealed and gasketed enclosure in industrial gray. Impact resistant, UV stable, flame rated thermoplastic lamp housing and swivel assemblies in gray finish to match unit housing. Heads and swivels are sealed and gasketed. Lighting heads are fully adjustable and feature lockable swivels.

ILLUMINATION: High output incandescent lamps maximize illumination characteristics through a specially designed reflector and glass lens assembly that provides glare-free trapezoidal light distribution. Lamp Type: Incandescent - wedge base 6 Volt Lamp Rating: 6 volt, 7.2 watt 12 Volt Lamp Rating: 12 volt, 12 watt Lamp Life: 100 hours (expected average)

BATTERY TECHNOLOGY: Sealed lead calcium maintenance free battery designed to provide many years of dependable service. Optional batteries include pure lead extended life battery and nickel cadmium longest light batteries.

INSTALLATION: Units are designed for installation to wall surfaces by means of four mounting tabs provided on the enclosure.

ELECTRICAL SPECIFICATIONS: Charger Type: Fully automatic, temperature compensating, variable rate float charger
Utility Input: 120/277VAC, 60 Hz. Power Consumption: 15 watts (maximum)
Temperature Range: 32ºF to 104ºF (0ºC to 40ºC)
Recharge Duty Cycle: 24 hours
Load Transfer: 6 volt models rated 25 watts or less and 12 volt models rated 50 watts or less utilize a solid state transfer circuit for load connection. All other models utilize mechanical relays for load transfer and provide fused DC load connections.
Controls: Momentary test switch and LED AC-On indicator light
Safety Circuitry: AC Lockout: Prevents battery discharge prior to initial unit power-up saving installation time.
Low Voltage Battery Disconnect: Protects the battery from being severely damaged by deep discharge during prolonged power failures. DC Overload and Short Circuit Protection: On units with solid state transfer, output protection is provided by a disconnect circuit that automatically resets itself when the fault condition is corrected. On units with mechanical relay transfer, output protection is provided by fused load connections. Brownout Protection: Automatically switches the unit to emergency mode when utility voltage is reduced to the point at which most fluorescent light fixtures would extinguish.

CODE COMPLIANCE: All models are UL924 Listed and meet NFPA 101 Life Safety Code, NEC, OSHA, complies with state and local codes.